Everpure MRS-100CC-BL EV997363 Reverse Osmosis System

Description Features of the Everpure MRS-100CC-BL EV9973-63 Reverse Osmosis System include: Part Number: EV9973-63 (Old EV9970-10) Improves equipment life and performance by removing at least 90% of all dissolved solids that cause scale build-up  Guards against taste and odor causing contaminants while removing dirt, particulates and dissolved minerals that can adversely affect taste of water and beverages  Wall mount design allows flexible installation  Reduces limescale build-up that can cause excessive machine downtime and increased maintenance costs  Scale reduction reduces energy costs  “CC” models introduce a small amount of hardness minerals back into the treated water  This controlled re-mineralization is desirable for coffee and other applications that require some hardness to achieve optimum results  Specifications: Overall Dimensions: 30” H (34” H – CC Model) x 15” W (20.5” Wwith Prefilter) x 8“ D 762 mm H (864mm H – CC Model) x 381 mm W (521 mm W with Prefilter) x 203 mm D  Voltages: 115VAC/60Hz (NEMA 5-15P Plug)  230VAC/50Hz (“Schuko” CEE 7/7 Plug)  240VAC/50Hz (AS 3112 Plug)  Inlet and outlet connection: 3/8″ OD tube connection  Wastewater line connection: 1/4″ OD tube connection  Service Flow Rate: Dependant on water pressure in storage tankand line size(s) to equipment  Pressure Requirements: Operating: 25 – 80 psi (172-552 kPa), non-shock  Maximum Static: 100 psi (689 kPa), non-shock  Water Supply: 0.7 gpm (2.7 lpm)  Inlet Temperature: 40°F – 100°F (4-38°C)  Inlet TDS: 1,500 ppm max recommended  Operating Weight: 35 lbs. (15.9 kg.)(not including storage tanks) Operation Tips Change filter cartridges on a regular 6-month preventative maintenance program Change RO cartridges on a regular 2-year preventative maintenance program Change cartridges when capacity is reached Always flush the filter cartridge at time of installation and cartridge change Proper pre-treatment is required to control RO Cartridge (membrane) scale formation and/or fouling Raw water hardness in excess of 7 grains per gallon should be softened The raw water may contain particulates and the use of a pre-filter is recommended Contact EVERPURE Technical Service for pre-treatment recommendations Installation Tips Choose a mounting location suitable to support the full weight of the system when operating Deliming of equipment prior to application is recommended Never use saddle valve for connection  Use 3/8” (10 mm) water line The water inlet must supply a minimum of 0.7 gpm (2.7 lpm) Install vertically with cartridge hanging down and allow 2 inches above and below unit for cover removal and service access Allow clearance to right of unit for optional prefilter Refer to Installation, Operation & Maintenance Manual for cartridge flushing and RO start-up Contact FilterPure at 1-800-942-7873 for additional product information. Download the